subject
Engineering, 12.11.2019 06:31 xxkeyxx51

With high aeration rates, significant amounts of water can beevaporated into the air passing through a fermentation broth. since fermentation can be adverselyaffected if water loss is significant, th e air i s humidified before being fed to the fermenter. sterilizedambient air is combined with steam to form a saturated air-water mixture at 1 atm and 90°c. the mixture i s cooled to the temperature of the fermenter (35°c), condensing some of the water, and thesaturated air is fed to the bottom of the fermenter. for an air flow rate to the fermenter of i 0 l/min at35°c and 1 atm, estimate the rate at which steam must be added to the sterilized air and th e rate(kg/min) at which condensate is collected upon coolin g the air-steam mixture .

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
question
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
With high aeration rates, significant amounts of water can beevaporated into the air passing through...
Questions
question
Mathematics, 21.08.2019 21:20
Questions on the website: 13722367