Engineering, 11.11.2019 19:31 ash3246
The tool move from (0,0) to (0, 3.5) and then continue to finish the while profile. the tool diameter is store in register d12. use absolute movement g90. to program this part profile, use the .750 diameter end mill, starting at lower left hand corner. use cutter compensation, and climb cut part profile with only one finish pass .450 deep. use feedrate of 10 inch/min for cutting. tool 12 – ¾ dia. 4 flt. end mill; surface speed (fpm) = 275.; chip per flute: .0025
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
You know the right answer?
The tool move from (0,0) to (0, 3.5) and then continue to finish the while profile. the tool diamete...
Questions
Mathematics, 17.12.2020 22:40
Arts, 17.12.2020 22:40
English, 17.12.2020 22:40
Biology, 17.12.2020 22:40
Arts, 17.12.2020 22:40
Spanish, 17.12.2020 22:40
Biology, 17.12.2020 22:40
Arts, 17.12.2020 22:40
