subject
Engineering, 09.11.2019 04:31 ubdental

Compare gbn, sr, and tcp (no delayed ack). assume that the timeout values for all three protocols are sufficiently long such that 5 consecutive data segments and their corresponding acks can be
received (if not lost in the channel) by the receiving host (b) and the sending host (a) respectively. suppose host a sends 5 data segments to host b, and the second segment (sent from a) is lost. in the end, all 5 data segments have been correctly received by host b.

(a) how many segments has host a sent in total and how many acks has host b sent in total? what are their sequence number? answer this question for all three protocols.

(b) if the timeout values for all three protocols are much longer than 5 rtt, then which protocol
successfully delivers all five data segments in the shortest time interval?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aloaded platform of total mass 500 kg is supported by a dashpot and by a set of springs of effective stiffness 72 kn/m. it is observed that when the platform is depressed through a distance x = 12.5 cm below its equilibrium position and then released without any initial velocity; it reaches its equilibrium position in the shortest possible time without overshoot. find the position and velocity of the loaded platform 0.10 sec. after its release. if a further load of 400 kg is added to the platform, find, i) the frequency of damped vibrations, and i) the amplitude of vibration after 2 complete oscillations, given that the initial amplitude is 15 cm.
Answers: 1
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 06.07.2019 03:10
Different between boring and turning?
Answers: 1
question
Engineering, 06.07.2019 03:30
An ammonia compressor has a 5% clearance volume and displacement rate of 80 l/s and pumps against a condensing temperature of 40°c. for two different temperatures of -10°c and 10°c, compute the mass flow rate of refrigerant assuming the clearance volumetric efficiency applies. discharge specific volume corresponding to-10°c and 10°c are 112.5 l/kg and 95 l/kg, respectively.
Answers: 2
You know the right answer?
Compare gbn, sr, and tcp (no delayed ack). assume that the timeout values for all three protocols ar...
Questions
question
Mathematics, 27.11.2019 04:31
question
Mathematics, 27.11.2019 04:31
Questions on the website: 13722367