Engineering, 07.11.2019 23:31 jdkrisdaimcc11

Rectification of a heptane–ethyl benzene mixture. a saturated liquid feed of 200 mol/h at the boiling point containing 42 mol % heptane and 58% ethyl benzene is to be fractionated at 101.32 kpa abs to give a distillate containing 97 mol % heptane and a bottoms containing 1.1 mol % heptane. the reflux ratio used is 2.5: 1. calculate the mol/h distillate, mol/h bottoms, theoretical number of trays, and the feed tray number. equilibrium data are given below at 101.32 kpa abs pressure for the mole fraction n-heptane h and yh:

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The mass flow rate of the fluid remains constant in all steady flow process. a)- true b)- false

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

You know the right answer?

Rectification of a heptane–ethyl benzene mixture. a saturated liquid feed of 200 mol/h at the boilin...

Questions