Engineering, 06.11.2019 04:31 mgkman9814
Standards for firewalls may be based on their thermal response to a prescribed radiant heat flux. consider a 0.25-m-thick concrete wall (rho= 2300 kg/m3, c= 880 j/kg·k, k= 1.4 w/m·k), which is at an initial temperature of ti= 25°c and irradiated at one surface by lamps that provide a uniform heat flux of qs′′= 0.85·104 w/m2. the absorptivity of the surface to the irradiation is αs= 1.0. if building code requirements dictate that the temperatures of the irradiated and back surfaces must not exceed 325°c and 25°c, respectively, after 30 min of heating, will the requirements b
Answers: 1
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
Engineering, 04.07.2019 18:20
For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.
Answers: 1
Standards for firewalls may be based on their thermal response to a prescribed radiant heat flux. co...
Computers and Technology, 26.06.2019 01:50
Spanish, 26.06.2019 01:50
Biology, 26.06.2019 01:50
English, 26.06.2019 01:50
Mathematics, 26.06.2019 01:50
Mathematics, 26.06.2019 01:50
Mathematics, 26.06.2019 01:50
History, 26.06.2019 01:50
Chemistry, 26.06.2019 01:50