Engineering, 02.11.2019 06:31 bryanmcmillianjr

Acircular bar is constructed by bonding an aluminum shell around a solid steel cylinder. the radius of the steel cylinder is rs = 10 mm, and the outer radius of the aluminum shell is ra = 20 mm. the overall length of the bar is given by l = 1 m and a torque t = 1 kn-m is applied at the ends. the shear moduli for the aluminum and steel are ga = 28 gpa and gs = 76 gpa, respectively.

(1) find the maximum shear stress in the steel and in the aluminum

(2) determine the total twist angle of the bar

(3) determine the torsional stiffness

(4) find the allowable torque for a safety factor of 2 when the yield stresses for both materials is 300 mpa.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ifa component is made of two or more materials with different modulus of elasticity (e), it is called a composite member and we calculate the factor·n". mention the formula for calculating n". also, ifn> 1, explain what will happen to the 1. transformed.gi) ifn 1, what will happen to the material when transformed material when

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

You know the right answer?

Acircular bar is constructed by bonding an aluminum shell around a solid steel cylinder. the radius...

Questions