subject
Engineering, 02.11.2019 05:31 doggosbepis

Air at standard conditions flows along a flat plate. the undis- turbed freestream speed is u0 = 20 m=s. at l = 0: 4 m downstream from the leading edge of the plate, the boundary-layer thickness is δ = 2 mm. the velocity profile at this location is approximated as u=u0 =y=δ. calculate the horizontal component of force per unit width required to hold the plate stationary.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 18:10
The higher the astm grain-size number, the coarser the grain is. a)-true b)-false
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
You know the right answer?
Air at standard conditions flows along a flat plate. the undis- turbed freestream speed is u0 = 20 m...
Questions
question
History, 17.10.2019 18:10
Questions on the website: 13722363