Engineering, 02.11.2019 04:31 lamontcarter

An orifice meter is installed in a 25.4-cm-id pipe. the diameter of the orifice is 20 [cm]. using a numerical method like what we discussed in class, determine the mass flowrate in the pipe [kg/s] if the pressure drop on the orifice is measured to be 20.5 kpa by a differential pressure transducer. the discharge coefficient equation for an orifice is c0.59590,031292 1 0.184ges 91.71 β2.5 re75 (10.13) where b is the diameter ratio. you can write a matlab code to solve this problem (change c in a loop with increments of 0.001 and test it). use rho-1000 kg/m3 and μ 0.001 pa. s for water.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

You know the right answer?

An orifice meter is installed in a 25.4-cm-id pipe. the diameter of the orifice is 20 [cm]. using a...

Questions