Engineering, 01.11.2019 04:31 ptrlvn01
Athree-point bending test was performed on an aluminum oxide specimen having a circular cross section of radius 3.5 mm (0.14 in.); the specimen fractured at a load of 950 n (215 lbf) when the distance between the support points was 50 mm (2.0 another test is to be performed on a specimen of this same material, but one that has a square cross section of 12 mm (0.47 in.) length on each edge. at what load would you expect this specimen to fracture if the support point separation is 40 mm (1.6
Answers: 2
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Athree-point bending test was performed on an aluminum oxide specimen having a circular cross sectio...
Social Studies, 13.06.2021 02:40
History, 13.06.2021 02:40
Mathematics, 13.06.2021 02:40
Biology, 13.06.2021 02:40
Mathematics, 13.06.2021 02:40
Chemistry, 13.06.2021 02:40
Social Studies, 13.06.2021 02:40
Mathematics, 13.06.2021 02:40
Chemistry, 13.06.2021 02:40
Social Studies, 13.06.2021 02:40