subject
Engineering, 31.10.2019 03:31 rjeus

Consider the up conversion of a dc baseband signal of unit amplitude to 6.4 normalized frequency f 0.3. (a) in simulation, digitally up-convert one thousand samples of a dc signal plot an estimate of the power spectral density for the baseband signal. (b) in simulation, digitally up-convert one thousand samples of a dc signal and plot an estimate of the power spectral density for the pass band signal. 6.5 for a line-of-sight link, evaluate the snr for a 100 mw transmitter with transmit and receive antennas with 0 dbi. assume that the link length is 1 kn, the bandwidth is 20 mhz, the carrier frequency is 2.4 ghz, and the noise figure is 6 db.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:20
Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options
Answers: 2
question
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
Consider the up conversion of a dc baseband signal of unit amplitude to 6.4 normalized frequency f 0...
Questions
question
Mathematics, 20.07.2019 21:00
Questions on the website: 13722361