subject
Engineering, 31.10.2019 03:31 raidattarab

Asewage lagoon that has a surface area of 10 ha and a depth of 1 m is receiving 8640 m3 · d−1 of sewage containing 100 mg · l−1 of biodegradable contaminant. at steady state, the effluent from the lagoon must notexceed20mg·l−1 . no losses or gains of water in the lagoon other than the sewage input, what biodegradation reaction rate coefficient (d−1) must be achieved for a first-order reaction?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
question
Engineering, 04.07.2019 18:20
Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.
Answers: 2
You know the right answer?
Asewage lagoon that has a surface area of 10 ha and a depth of 1 m is receiving 8640 m3 · d−1 of sew...
Questions
question
Mathematics, 20.03.2020 17:01
question
Mathematics, 20.03.2020 17:01
Questions on the website: 13722367