Engineering, 31.10.2019 02:31 mayasiegel5234
Cite five factors that lead to scatter in measured material properties. upon what three criteria are factors of safety based? a large tower is to be supported by a series of steel wires. it is estimated the load on each wire will be 15,000 n. determine the minimum required wire diameter, assuming a factor of safety = 2.0 and a yield strength of 800 mpa (125,000 psi) for the steel. reflect by commenting on the meaning of your answer.
Answers: 2
Engineering, 04.07.2019 12:10
On a average work day more than work place firs are reorted
Answers: 1
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Manometers are good examples of measuring instruments, nowadays they are not as common as before. a)-capacitive probe gauges b)-gravitational gauges deformation ) gauges d)-digital gauges
Answers: 1
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
Cite five factors that lead to scatter in measured material properties. upon what three criteria are...
Mathematics, 05.09.2020 02:01
Mathematics, 05.09.2020 02:01
English, 05.09.2020 02:01
Social Studies, 05.09.2020 02:01
Computers and Technology, 05.09.2020 02:01
Mathematics, 05.09.2020 02:01