subject
Engineering, 30.10.2019 03:31 shamarmosley

Estimate the pre-exponential constant for the diffusion coefficient as a part of producing mosfet transistors, a p-type silicon (si) wafer containing boron (b) dopants at a concentration of 1x1019 atoms/cm3 is being processed to create a pn junction by doping the wafer with phosphorous (p) atoms using a p-producing gas. assume that the wafer does not contain p prior to the diffusion process. the solubility of p in si at 1000°c is 1x1020 atoms/cm3. it is determined that the pn junction depth of 1 um was produced after 60 minutes at 1000°c. the activation energy for estimating the diffusion coefficient of p in si is 2.5x105 j/mole. based on this result, "estimate the pre-exponential constant for the diffusion coefficient" of p in si at 1000°cincm2/s.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite
Answers: 3
question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
You know the right answer?
Estimate the pre-exponential constant for the diffusion coefficient as a part of producing mosfet tr...
Questions
question
Mathematics, 06.05.2021 22:00
question
Mathematics, 06.05.2021 22:00
question
Mathematics, 06.05.2021 22:00
Questions on the website: 13722367