subject
Engineering, 30.10.2019 02:31 chantihock05

In the book the hunt for red october a russian submarine is described which uses a silent "caterpillar" drive instead of a propeller. even though the propulsion system is very quiet, the submarine may still make a lot of noise if it goes too fast. the reason is that, if the speed of the submarine is too great, the static pressure at the point of maximum velocity over the submarine will drop below the vapor pressure for saturated water and the water will boil or cavitate. when the bubbles thus formed collapse, they make a lot of noise, making it easy to detect the submarine. the flow will not cavitate as long as the static pressure is greater than the vapor pressure of saturated water, p_v. for the purposes of this problem, assume the ocean has a uniform density rho = 1000 kg/m^3, atmospheric pressure acting on the surface of the ocean is p_a = 101 kpa (1.01 times 10^5 n/m^2), the acceleration due to gravity is g = 9.81 m/s^2, the vapor pressure of saturated water at 12 degree c is p_v = 1.4 kpa, and that the entire ocean has a uniform temperature of 12 degree c.

if the maximum velocity over the surface of the submarine is 2.0 times the freestream velocity, how fast can the submarine go at a depth of 100 m without cavitating? in order to go faster without being detected should the submarine increase or decrease its depth? explain your answer.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
Select any two (2) areas of applications of chain-drive. (clo4) a)-permanent lubrication necessary b)-hydraulic forklift truck operation c)-rigging and heavy moving materials d)-relatively high maintenance costs e)-costlier than belt drives
Answers: 2
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
In the book the hunt for red october a russian submarine is described which uses a silent "caterpill...
Questions
question
Mathematics, 30.08.2019 21:00
Questions on the website: 13722363