Engineering, 29.10.2019 05:31 yasarhan2

Acartridge electrical heater is shaped as a cylinder of length l=200 mm and outer diameter d=20 mm. under normal operating conditions the heater dissipates 2 kw while submerged in a water flow that is at 20c and provides a convection heat transfer coefficient of h=5000 w/mk. neglecting heat transfer from the ends of the heater, determine its surface temperature ts. if the water flow is inadvertently terminated while the heater continues to operate, the heater surface is ex posed to air that is also at 20c but for which h=50 w/m k. what is the corresponding surface temperature? what are the consequences of such an event?

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Answers: 3

Answer

You know the right answer?

Acartridge electrical heater is shaped as a cylinder of length l=200 mm and outer diameter d=20 mm....

Questions