Engineering, 25.10.2019 20:43 GILLIG6003

How many vms can you put on a host? your boss has received the following quote for a potential virtualization server: server dell r630processor dual xeon e5-2954memory 24 x 32gb rdimmnetwork dual intel x520dp 10gb sfp+total cost $24,198.13this server will be attached to an existing iscsi san in your network. your boss wants to use this hardware to host several vms, each with 2 vcpus and 4gb ram. note: performance monitoring for the vms show an average of < 10% cpu utilization and 3gb ram utilizationyour boss wants you to research and discuss how many of these vms can be run on this hardware. why? what are the limiting factors? if faster cpus, more ram, or other components are added to this host, can you put more vms on this host?

is there a maximum number of vms you can put on this server? is there a maximum number that you should be put on this server?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 18:20

For a gate width of 2 m into the paper, determine the force required to hold the gate abc at its location.

Answers: 1

Answer

Engineering, 05.07.2019 10:10

What is the correct way to measure the overall length of a boat? measure from the tip of the bow to the highest point on the gunwale. measure from the tip of the bow in a straight line to the stern of the boat. measure from the tip of the bow in a straight line to the back seat. measure from port to starboard at the boat's widest point.

Answers: 1

Answer

Engineering, 06.07.2019 03:10

Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?

Answers: 2

Answer

You know the right answer?

How many vms can you put on a host? your boss has received the following quote for a potential virtu...

Questions