Engineering, 25.10.2019 18:43 anggar20

Universal containers has successfully implemented a large service cloud rollout for their national call center 3 months ago. one of their largest customer accounts, united automotive, has over 15,000 open cases. agents are now having trouble opening new cases for united automotive. when they try to create a case, the following error messages appear for them unable_to_lock_row they notice that this only occurs for the united automotive account. if they try to save the case again it will usually work, but the problem seems to be happening more and more often. what option should the architect recommend? a. review the account structure to split the united automotive account into multiple branchaccounts. b. review the customer service profile to ensure that they have read/write access to theappropriate case and account fields. c. review all case sharing rules and consolidate where appropriate to reduce the total number ofsharing rules. d. review all account sharing rules to ensure that the customer service team has read/write accessto the united automotive account.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.

Answers: 1

Answer

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

You know the right answer?

Universal containers has successfully implemented a large service cloud rollout for their national c...

Questions