subject
Engineering, 24.10.2019 23:43 Manuel2019

After a 27-hour heat treatment at 1000°c (and subsequent cooling to room temperature), the concentration of a is 3.8 wt% at the 14.4-mm position within metal b. if another heat treatment is conducted on an identical diffusion couple, this time at 880°c for 27 hours, at what position will the composition be 3.8 wt% a? the preexponential and activation energy values for the diffusion of a in b are 3.7 × 10-6 m2/s and 152 kj/mol, respectively. x = enter your answer in accordance to the question statement mm

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
question
Engineering, 06.07.2019 03:10
Two slings are used to lift a girder of length l and uniform weight per unit length. what is the best position for the slings if the bending moment due to the weight of the girder is to be kept to a minimum?
Answers: 2
question
Engineering, 06.07.2019 03:20
Explain in your own word the concept of a solid solution, in alloys, and how it can be created.
Answers: 3
You know the right answer?
After a 27-hour heat treatment at 1000°c (and subsequent cooling to room temperature), the concentra...
Questions
question
Mathematics, 11.07.2019 04:40
question
Mathematics, 11.07.2019 04:40
question
Mathematics, 11.07.2019 04:40
Questions on the website: 13722363