Engineering, 23.10.2019 20:30 makaileep1623
1. what problems are to occur if a concrete has too low of a slump? 2. explain the differences between reinforcing and prestressing and the relative advantages and disadvantages of each. 3. what are control joints and isolation joints? explain the purpose and typical locations of each in a concrete slab. 4. explain the role of stirrups in beams. 5. why are precast concrete structural members usually cured with steam? 6. describe the following key terms and concepts: a. self-consolidated concrete b. lift-slab construction c. column tie d. waffle slab e. double tee
Answers: 2
Another question on Engineering
Engineering, 04.07.2019 18:10
Determine whether or not it is possible to compress air adiabatically from k to 140 kpa and 400 k. what is the entropy change during this process?
Answers: 3
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
You know the right answer?
1. what problems are to occur if a concrete has too low of a slump? 2. explain the differences betw...
Questions
Geography, 15.10.2020 07:01
Social Studies, 15.10.2020 07:01
English, 15.10.2020 07:01
Biology, 15.10.2020 07:01
English, 15.10.2020 07:01
History, 15.10.2020 07:01
Mathematics, 15.10.2020 07:01
History, 15.10.2020 07:01
Mathematics, 15.10.2020 07:01
