subject
Engineering, 22.10.2019 23:00 jalonnolan

The precision scientific instrument company manufactures thermometers that are supposed to give readings of 0degrees°c at the freezing point of water. tests on a large sample of these thermometers reveal that at the freezing point of water, some give readings below 0degrees°c (denoted by negative numbers) and some give readings above 0degrees°c (denoted by positive numbers). assume that the mean reading is 0degrees°c and the standard deviation of the readings is 1.00degrees°c. also assume that the frequency distribution of errors closely resembles the normal distribution. a thermometer is randomly selected and tested. a quality control analyst wants to examine thermometers that give readings in the bottom 4%. find the temperature reading that separates the bottom 4% from the others. round to two decimal places

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 03:10
What precautions should you take to prevent injuries when dealing with heavy loads?
Answers: 1
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
You know the right answer?
The precision scientific instrument company manufactures thermometers that are supposed to give read...
Questions
question
English, 01.12.2019 07:31
question
Mathematics, 01.12.2019 07:31
question
Social Studies, 01.12.2019 07:31
Questions on the website: 13722367