subject
Engineering, 15.10.2019 05:00 coreycbg1127

Adrillstring is composed of 9000 ft of 5-in. 19.5-lbm/ft drillpipe and 1000 ft of drill collars having a 8.0-in. od, 3.0-in. id. compute: a) capacity of the drillpipe in barrels. b) capacity of the drill collars in barrels. c) number of pump cycles required to pump surface mud to the bit. the pump is a duplex double acting pump with 6-in. liners, 2.5-in. rods, 16-in. strokes, and operates at a volumetric efficiency of 85%. d) displacement of the drillpipe in bbl/ft. e) displacement of the drill collars in bbl/ft. the od of the collars is 8.0-in

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
question
Engineering, 04.07.2019 18:10
Carbon dioxide gas expands isotherm a turbine from 1 mpa, 500 k at 200 kpa. assuming the ideal gas model and neglecting the kinetic and potential energies, determine the change in entropy, heat transfer and work for each kilogram of co2.
Answers: 2
question
Engineering, 04.07.2019 18:20
Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um
Answers: 2
question
Engineering, 04.07.2019 19:20
Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w
Answers: 2
You know the right answer?
Adrillstring is composed of 9000 ft of 5-in. 19.5-lbm/ft drillpipe and 1000 ft of drill collars havi...
Questions
question
Chemistry, 26.11.2019 09:31
question
Mathematics, 26.11.2019 09:31
question
Social Studies, 26.11.2019 09:31
question
Mathematics, 26.11.2019 09:31
Questions on the website: 13722363