subject
Engineering, 14.10.2019 19:20 120175

Consider a pressure vessel that is a thin-walled tube with closed ends and wall thickness t. the volume enclosed by the vessel is determined from the inner diameter d and length l by ve = πd2l/4. the ratio of a small change in the enclosed volume to the original volume (known as the volumetric strain) can be found by obtaining the differential dveand then dividing by ve. (a) obtain this expression, i. e., dve/ve.(b) derive an equation for dve/ve as a function of the pressure p in the vessel, the vessel dimensions, and elastic constants of the isotropic material. assume that l is large compared to d, so that the details of the behavior of the ends are not important.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 18:20
An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.
Answers: 3
You know the right answer?
Consider a pressure vessel that is a thin-walled tube with closed ends and wall thickness t. the vol...
Questions
question
English, 30.05.2020 02:59
question
History, 30.05.2020 02:59
question
Mathematics, 30.05.2020 02:59
Questions on the website: 13722363