Engineering, 11.10.2019 23:10 aesthetickait
Match the following foliated rocks with their metamorphic grade: a. schist 1. highest grade b. slate 2. second-highest grade c. gneiss 3. second-lowest grade d. phyllite 4. lowest grade
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
Engineering, 04.07.2019 18:10
Hydraulic fluid with a sg. of 0.78 is flowing through a 1.5 in. i.d. pipe at 58 gal/min. the fluid has an absolute viscosity of 11.8 x 105 lbf-sec/ft2. is the flow laminar, turbulent or within the critical range? give both a numerical reynolds number and a term answer.
Answers: 3
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
Match the following foliated rocks with their metamorphic grade: a. schist 1. highest grade b. slat...
Questions
Computers and Technology, 07.12.2021 03:10
SAT, 07.12.2021 03:10
Mathematics, 07.12.2021 03:10
SAT, 07.12.2021 03:10
Mathematics, 07.12.2021 03:10
History, 07.12.2021 03:10
SAT, 07.12.2021 03:10
