Engineering, 11.10.2019 06:00 Yani0118
In an orthogonal cutting operation, the rake angle = -8°, chip thickness before the cut = 0.22 mm and width of cut = 3.2 mm. the cutting force is 1750n and the thrust force is 1200n. the chip ratio = 0.42. determine: a-the chip thickness after the cut (b)-shear angle (c)-coefficient of friction (d)-friction angle (e)-shear strain.
Answers: 1
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:20
For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor
Answers: 3
Engineering, 05.07.2019 04:30
Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?
Answers: 2
Engineering, 06.07.2019 03:10
Oxygen at 300 kpa and 400 k is in a closed system with an initial volume of 0.1 m3. is now compressed in a polytropic process, with exponent of n 1.2, to a temperature of 500 k. calculate: a) the boundary work done during the compression, in kj b) the heat transfer during the compression, in kj
Answers: 3
In an orthogonal cutting operation, the rake angle = -8°, chip thickness before the cut = 0.22 mm an...
Biology, 13.04.2021 03:10
Biology, 13.04.2021 03:10
Mathematics, 13.04.2021 03:10
Mathematics, 13.04.2021 03:10
Social Studies, 13.04.2021 03:10
Mathematics, 13.04.2021 03:10
Arts, 13.04.2021 03:10
History, 13.04.2021 03:10
History, 13.04.2021 03:10
Social Studies, 13.04.2021 03:10
History, 13.04.2021 03:10