subject
Engineering, 11.10.2019 06:00 klivingston1012

A900 kg car is accelerated from a speed of 10 m/s to 30 m/s. an estimated heat loss of 20 btu's occurs during the acceleration. also, the car increases its elevation by 20m and the internal energy increases by 0.1 kj/kg. determine the amount of work that must be done to the system in kj.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
question
Engineering, 04.07.2019 19:20
Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer,e = 5 × 105?
Answers: 2
question
Engineering, 05.07.2019 04:30
Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?
Answers: 2
question
Engineering, 06.07.2019 02:30
A12 mm diameter shaft runs in a plain cylindrical bush 30 mm long that is located in an 18 mm diameter hole in a housing. the shaft-inner bush fit is h8 f and the outer bush-housing fit is h7-p6. make a fully cimensioned sketch of the bush with tolerances. find the maximum and minimum clearance or interference for both fits on the inner and outer diameters of the bush
Answers: 3
You know the right answer?
A900 kg car is accelerated from a speed of 10 m/s to 30 m/s. an estimated heat loss of 20 btu's occu...
Questions
question
Mathematics, 15.10.2019 14:10
question
Chemistry, 15.10.2019 14:20
Questions on the website: 13722365