subject
Engineering, 11.10.2019 04:30 bossybaby12

Steam enters a turbine operating at steady state at p1=6 mpa, t1 = 600°c with a mass flow rate of 335 kg/min and exits as saturated vapor at p2=20 kpa, producing power of 5.36 mw. kinetic and potential energy effects can be ignored. heat transfer occurs from the turbine to its surroundings which are at to = 30°c determine the magnitude of the rate of heat transfer, in kw, and the rate of entropy production, in kw/k, within an enlarged control volume that includes the turbine and enough of its surroundings for the heat transfer to occur at to=30°c.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Afluid flows with a velocity field given by v=(x/t)i.. determine the local and convective accelerations when x=3 and t=1.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
Steam enters a turbine operating at steady state at p1=6 mpa, t1 = 600°c with a mass flow rate of 33...
Questions
question
Mathematics, 10.12.2020 20:10
question
Mathematics, 10.12.2020 20:10
question
Chemistry, 10.12.2020 20:10
question
Chemistry, 10.12.2020 20:10
Questions on the website: 13722363