Engineering, 10.10.2019 21:10 ella9288

Convection, conduction, and overall u. a gas at 450 k is flowing inside a 2-in. steel pipe, schedule 40. the pipe is insulated with 51 mm of lagging having a mean k = 0.0623 w/m · k. the convective heat-transfer coefficient of the gas inside the pipe is 30.7 w/m2 · k and the convective coefficient on the outside of the lagging is 10.8. the air is at a temperature of 300 k. calculate the heat loss per unit length of 1 m of pipe using resistances. repeat, using the overall u0 based on the outside area a0.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid

Answers: 3

Answer

Engineering, 04.07.2019 19:10

What is the chief metrological difference between measuring with a microscope and with an electronic comparator? a. the microscope is limited to small workpieces.a. the microscope is limited to small workpieces. c. the comparator can only examine one point on the workpiece. d. the microscope carries its own standard.

Answers: 1

Answer

Engineering, 04.07.2019 19:20

Afan that can provide air speeds up to 60 m/s is to be used in a low-speed wind tunnel with atmospheric air at 35 c. if one wishes to use the wind tunnel to study flat-plate boundary layer behavior up to reynolds numbes of re 10, what is the minimum plate length that should be used? at what distance from the leading edge would transition occur if the critical reynolds nurnber were rer,e = 5 × 105?

Answers: 2

Answer

Engineering, 05.07.2019 04:30

Technician a says that in a worm gear steering system, most excessive steering free play is usually found in the gearbox. technician b says that in a rack-and-pinion steering system, excessive free play can be found in the bushings. who is correct?

Answers: 2

Answer

You know the right answer?

Convection, conduction, and overall u. a gas at 450 k is flowing inside a 2-in. steel pipe, schedule...

Questions