Engineering, 10.10.2019 20:30 kellersweeney

Acartridge electrical heater is shaped as a cylinder of length l=200 mm and outer diameter d=20 mm. under normal operating conditions the heater dissipates 2 kw while submerged in a water flow that is at 20c and provides a convection heat transfer coefficient of h=5000 w/mk. neglecting heat transfer from the ends of the heater, determine its surface temperature ts. if the water flow is inadvertently terminated while the heater continues to operate, the heater surface is ex posed to air that is also at 20c but for which h=50 w/m k. what is the corresponding surface temperature? what are the consequences of such an event?

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 19:20

A21-tooth spur pinion mates with a 28-tooth gear. the diametral pitch is 3 teeth/in and the pressure angle is 20°, find the following values: the addendum, dedendum, circular pitch, tooth thickness, and base circle diameters.

Answers: 2

Answer

You know the right answer?

Acartridge electrical heater is shaped as a cylinder of length l=200 mm and outer diameter d=20 mm....

Questions