Engineering, 09.10.2019 01:00 KKHeffner02

An inclined tube manometer with a reservoir is used to measure the pressure gradient in a large pipe carrying oil (sg = 0.91). the pipe is inclined at an angle of 60° to the horizontal, and flow is uphill. the manometer tube is inclined at an angle of 20° to the horizontal, and the pressure taps on the pipe are 5 inches apart. the manometer reservoir diameter is eight times as large as the manometer tube diameter, and the manometer fluid is water. if the manometer reading (l) is 3 inches and the displacement of the interface in the reservoir is neglected, what is the pressure drop in the pipe in (a) psi; (b) pa; (c) in. h2o? what is the percentage error introduced by neglecting the change in elevation of the interface in the reservoir?

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 08:10

Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

True or false (explain) (110)[111] is a slip system in bcc metals . the {111} family in fcc contains 8 planes. resolved shear stress (rss) in single crystals is just related to the applied stress. critical resolved shear stress (crss) in single crystal metals is direct proportional to the number of defects in the structure

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

You know the right answer?

An inclined tube manometer with a reservoir is used to measure the pressure gradient in a large pipe...

Questions