Engineering, 08.10.2019 06:00 jasiyous21
You are designing a pmd and optimizing it for low energy. the core, including an 8 kb l1 data cache, consumes 1 w whenever it is not in hibernation. if the core has a perfect l1 cache hit rate, it achieves an average cpi of 1 for a given task, that is, 1000 cycles to execute 1000 instructions. each additional cycle accessing the l2 and beyond adds a stall cycle for the core. based on the following specifications, what is the size of l2 cache that achieves the lowest energy for the pmd (core, l1, l2, memory) for that given task?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned
Answers: 2
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 18:20
Along 8-cm diameter steam pipe whose external surface temperature is 900c connects two buildings. the pipe is exposed to ambient air at 70c with a wind speed of 50 km/hr blowing across the pipe. determine the heat loss from the pipe per unit length. (b) air at 500c enters a section of a rectangular duct (15 cm x 20 cm) at an average velocity of 7 m/s. if the walls of the duct are maintained at 100c. a) the length of the tube for an exit temperature of the air to be 40 0c. b)the rate of heat transfer from the air. c) the fan power needed to overcome the pressure drop in this section of the duct.
Answers: 1
You know the right answer?
You are designing a pmd and optimizing it for low energy. the core, including an 8 kb l1 data cache,...
Questions
Geography, 21.03.2020 04:16
Biology, 21.03.2020 04:16
Mathematics, 21.03.2020 04:17
Physics, 21.03.2020 04:17
Mathematics, 21.03.2020 04:17
English, 21.03.2020 04:17
Mathematics, 21.03.2020 04:18
