subject
Engineering, 08.10.2019 02:00 sunshine52577oyeor9

Air enters the compressor of a cold air-standard brayton cycle with regeneration, intercooling, and reheat at 100 kpa, 300 k, with a mass flow rate of 6 kg/s. the compressor overall pressure ratio is 10, and the pressure ratios are the same across each compressor stage. the intercooler and reheater both operate at the same pressure. the temperature at the inlet to the second compressor stage is 300 k, and the inlet temperature for each turbine stage is 1400 k. the compressor and turbine stages each have isentropic efficiencies of 80% and the regenerator effectiveness is 80%. for k = 1.4 & cp = 1.005 kj/kg. k, calculate (a) the thermal efficiency of the cycle. (b)the back work ratio. (c) the net power developed, in kw.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 19:10
What is creep? what is stress relaxation?
Answers: 1
question
Engineering, 04.07.2019 19:10
Ahelical coil spring has a mean diameter of 50 mm, a wire diameter of 5.5 mm and is wound with a pitch of 10 mm. the spring steel has an ultimate strength of 1250 mpa. find the force needed to compress the spring solid and the wire stress in this condition. state whether the spring will return to its initial length.
Answers: 1
question
Engineering, 06.07.2019 03:10
List and describe the attached tools in boxford cnc milling machine? and how many tools were used in your projects explain them?
Answers: 3
question
Engineering, 06.07.2019 03:20
Steam at a pressure of 100 kpa and a quality of 50% initially fills a rigid vessel having a volume of 0.5 m^3. the steam is then heated, causing the pressure in the vessel to rise to 150 kpa. determine: i. the mass of the steam in the vessel. ii. the temperature and quality of the steam after the heating process. ii the mass of the vapour, mg and liquid, m in the vessel after the heating process. if the steam in the vessel is now further heated, what would the pressure and temperature in the vessel be when all steam has turned into saturated vapour? b. sketch the processes in part (a) and part (b) on p-v and t-v diagrams, indicating clearly the temperatures, pressures and the paths. c. (0.59kg, 111.4°c, 73%, 0.4307kg, 0.1 593kg, 2.11 bar, 121.84°c)
Answers: 1
You know the right answer?
Air enters the compressor of a cold air-standard brayton cycle with regeneration, intercooling, and...
Questions
Questions on the website: 13722363