subject
Engineering, 07.10.2019 23:30 Ashtree519

Atank initially contains 120 l of pure watera tank originally contains 100 gal of fresh water. then water containing 1 2 lb of salt per gallon is poured into the tank at a rate of 2 gal/min, and the mixture is allowed to leave at the same rate. after 10 min the process is stopped, and fresh water is poured into the tank at a rate of 2 gal/min, with the mixture again leaving at the same rate. find the amount of salt in the tank at the end of an additional 10 min. a mixture containing a concentration of γ g/l of salt enters the tank at a rate of 2 l/min, and the well-stirred mixture leaves the tank at the same rate. find an expression in terms of γ for the amount of salt in the tank at any time t. also find the limiting amount of salt in the tank as t → [infinity]

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
question
Engineering, 04.07.2019 18:20
Avolume of 2.65 m3 of air in a rigid, insulated container fitted with a paddle wheel is initially at 264 k, 5.6 bar. the air receives 432 kj by work from the paddle wheel. assuming the ideal gas model with cv = 0.71 kj/kg • k, determine for the air the amount of entropy produced, in kj/k
Answers: 2
You know the right answer?
Atank initially contains 120 l of pure watera tank originally contains 100 gal of fresh water. then...
Questions
question
Mathematics, 16.02.2021 22:00
question
Chemistry, 16.02.2021 22:00
question
Mathematics, 16.02.2021 22:00
question
Mathematics, 16.02.2021 22:00
question
English, 16.02.2021 22:00
Questions on the website: 13722367