subject
Engineering, 07.10.2019 19:30 Lawrence101

Steam at 200psi and 600 of (state 1) enters a turbine through a 3-inch-diameter pipe with a velocity of 10 ft/s. the exhaust from the turbine is carried through a 10-inch-diameter piper and is at 5 psi and 200 of (state 2). assume no heat exchange at the turbine, what is the power output of the turbine? the following state functions are given: h1=1322.6 btu/lbm, h2= 1148.6 btu/lbm, v1= 3.058 ft3/lbm, v2= 78.14 ft3/lbm.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 19:10
When subject to a steady load (within elastic range) over a long period of time, what is the major difference in material behavoir between steel and plastic?
Answers: 2
question
Engineering, 04.07.2019 19:10
Estimate the change in specific internal energy au and specific enthalpy h from inlet to outlet for ethylene glycol (a liquid) flowing through each of the following devices: (a) a heat exchanger where the glycol temperature increases from 20 °c to 80 °c; (b) a pump operating at about 25 °c and increasing the glycol pressure from 100 kpa to 8 mpa.
Answers: 2
question
Engineering, 04.07.2019 19:10
Agas contained within a piston-cylinder assembly e end nation about same energy states, 1 and 2, where pi 10 bar, v undergoes two processes, a and b, between the sam 0.1 m3, ui-400 kj and p2 1 bar, v2 1.0 m2, u2 200 kj: process a: process from 1 to 2 during which the pressure- volume relation is pv constant process b: constant-volume process from state 1 to a pressure of 2 bar, followed by a linear pressure-volume process to +20 0 state 2 kinetic and potential energy effects can be ignored. for each of the processes a and b, (a) sketch the process on p-v coordinates, (b) evaluate the work, in kj, and (c) evaluate process the heat transfer, in kj
Answers: 2
You know the right answer?
Steam at 200psi and 600 of (state 1) enters a turbine through a 3-inch-diameter pipe with a velocity...
Questions
question
English, 20.09.2019 10:20
question
Mathematics, 20.09.2019 10:20
Questions on the website: 13722367