Engineering, 05.10.2019 13:00 yolandacoles3066
Apower plant based on the rankine cycle is under development to provide a net power output of 10 mw. concentrating solar collectors are to be used to generate steam at 300 degrees c and 2 mpa for expansion through the turbine. cooling water exit temperature is at 20 degrees. estimate the thermal effiencey, steam flow rate, and water flow rate
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
Engineering, 04.07.2019 18:20
Wiy doeres rere okhn a pump whon working betwon the same pressure range?
Answers: 2
Engineering, 04.07.2019 18:20
Aheavily insulated piston-cylinder device contains 0.02 m3 of steam at 300 kpa and 200 °c. 1.2 mpa. d this process. team is now compressed in a reversible manner to a pressure of etermine the entropy change and the work done on the steam during this process
Answers: 1
You know the right answer?
Apower plant based on the rankine cycle is under development to provide a net power output of 10 mw....
Questions
Social Studies, 17.04.2021 19:50
English, 17.04.2021 19:50
History, 17.04.2021 19:50
Health, 17.04.2021 19:50
Mathematics, 17.04.2021 19:50
English, 17.04.2021 19:50
History, 17.04.2021 19:50
Mathematics, 17.04.2021 19:50
History, 17.04.2021 19:50
