Engineering, 05.10.2019 13:30 twalters88
Adouble reduction gearbox is required to transmit 5.5 kw from a shaft rotating at 2000 rpm. the desired output speed is approximately 350 rpm. draw this gear arrangement and select suitable gears for it.
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
Engineering, 04.07.2019 19:10
The maximum shear stress and maximum flexural stress occur at the same location along a beam subjected to a non-uniform bending load. a)-trune b)- false
Answers: 2
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
Engineering, 06.07.2019 03:10
Steel balls 12 mm in diameter are annealed by heating to 1150 k and then slowly cooled to 400 k in an air att 325 k and h -20 w/m2 k. assume the properties of the steel to be k- 40 w/m k,p 7800 kg/m3, and cp 600 j/kg k. a. determine whether lumped system method can be used to analyze this problem and if so why" b. determine the time required for the cooling process. c. determine the total amount of heat lost from each ball to the ambient air
Answers: 1
You know the right answer?
Adouble reduction gearbox is required to transmit 5.5 kw from a shaft rotating at 2000 rpm. the desi...
Questions
Mathematics, 04.01.2021 03:40
Mathematics, 04.01.2021 03:50
Chemistry, 04.01.2021 03:50
Arts, 04.01.2021 03:50
Mathematics, 04.01.2021 03:50
Mathematics, 04.01.2021 03:50
English, 04.01.2021 03:50
