subject
Engineering, 05.10.2019 13:30 champton79

Adouble threaded worm drive has an axial pitch of 25 mm and a pitch circle diameter of 70 mm. the torque on the worm gear shaft is 1400 n-m. the pitch circle diameter of the worm gear is 250 mm and the tooth pressure angle is 25°. find : 1. tangential force on the worm gear, 2. torque on the worm shaft, 3. separating force on the worm, 4. velocity ratio, and 5. efficiency of the drive, if the coefficient of friction between the worm thread and gear teeth is 0.04.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.
Answers: 1
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 19:10
An external consultant recommends that a plant installs a bank of capacitors for power factor correction. this will reduce the peak electrical demand charges by an average of 93 kw every month. the plant current pays $13 per kw in peak demand charges. the capacitor bank will include 223 kw of fixed capacitors, and 183 of variable capacitors. the fixed capacitors cost $59 per kw, and the variable capacitors will cost $65 per kw. the consultant charges 21% of the equipment costs to install the capacitors. because this project will reduce the demand for the electric utility, they are prepared to provide a one-time rebate of $42 per kw of reduced demand. what is the simple payback period for this project (in years)?
Answers: 2
question
Engineering, 06.07.2019 03:20
1kg of water contained in a piston-cylinder assembly undergoes two processes in series from an initial state where the pressure is 3.0 bar and the temperature is 150°c process 1-2: the water is compressed isothermally to a volume of 0.25 m^3 with 120 kj of work being done to the system. process 2-3: the water is heated at constant volume to a final pressure of 10 bar. a. find the change in internal energy for the system. b. calculate the amount of heat transferred, in kj. c. sketch both processes on a t-v diagram. (196.33 kj/kg, 76.33 kj)
Answers: 1
You know the right answer?
Adouble threaded worm drive has an axial pitch of 25 mm and a pitch circle diameter of 70 mm. the to...
Questions
question
Spanish, 23.09.2019 01:20
question
Mathematics, 23.09.2019 01:20
question
Mathematics, 23.09.2019 01:20
Questions on the website: 13722362