subject
Engineering, 05.10.2019 12:00 clairajogriggsk

Gas is sampled at 1 bar pressure from the exhaust manifold of an internal combustion engine and analyzed. the mole fractions of species in the exhaust are: h2o=0.0468; co2=0.0585; o2=0.123; n2=0.712 (d) the engine has a displaced volume of 2 liters. estimate approximately the percentage by which the fuel flow rate would be increased if this engine were operated at its maximum load at this same speed (2000 rev/min). explain briefly what limits the equivalence ratio at maximum load. hint use equivalent fuel to air ratio of 0.7 at engine maximum load.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
If the thermal strain developed in polyimide film during deposition is given as 0.0044. assume room temperature is kept at 17.3 c, and thermal coefficient of expansion for the film and the substrate are 54 x 10^-6c^-1 and 3.3 x 10^-6c^-1respectively. calculate the deposition temperature.
Answers: 3
question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15Β°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
You know the right answer?
Gas is sampled at 1 bar pressure from the exhaust manifold of an internal combustion engine and anal...
Questions
question
Mathematics, 02.01.2020 20:31
question
Mathematics, 02.01.2020 20:31
Questions on the website: 13722367