subject
Engineering, 03.10.2019 00:10 gia57

At room temperature (20 degrees c) a 0.5-mm gap exists

betweenthe ends of the rods shown. at a later time when

thetemperature has reached 140 degrees c determine (a) the

normalstress in the aluminum rod, (b) the change in lenth of the

aluminumrod.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.
Answers: 1
You know the right answer?
At room temperature (20 degrees c) a 0.5-mm gap exists

betweenthe ends of the rods shown...
Questions
question
Mathematics, 26.09.2019 19:30
question
Mathematics, 26.09.2019 19:30
question
English, 26.09.2019 19:30
Questions on the website: 13722363