Engineering, 01.10.2019 00:10 blackbetty79

The pin-connected structure consists of a rigid bar abc, a solid bronze [e = 102 gpa, 14.3 × 10−6/°c] rod (1), and a solid aluminum alloy [e = 61 gpa, 23.6 × 10−6/°c] rod (2). bronze rod (1) has a diameter of 25 and aluminum rod (2) has a diameter of 16 mm. the bars are unstressed when the structure is assembled at 32°c. after assembly, the temperature of rod (2) is decreased by 40°c, while the temperature of rod (1) remains constant at 32°c. assume l1 = 290 mm, l2 = 490 mm, a = 210 mm, and b = 410 mm. determine the normal stresses , in both rods for this condition (positive if tensile, negative if compressive).

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Answers: 3

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

You know the right answer?

The pin-connected structure consists of a rigid bar abc, a solid bronze [e = 102 gpa, 14.3 × 10−6/°c...

Questions