subject
Engineering, 29.09.2019 01:30 CameronVand21

Asteam power plant operates between a boiler pressure of 50 bar and a condenser pressure of 2 bar. calculate for these limits, the cycle efficiency, the work ratio, and the specific steam consumption: 1. for a carnot cycle using wet steam; 2. for a rankine cycle with dry saturated steam at entry to the turbine.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
question
Engineering, 04.07.2019 18:20
Agas mixture consists of 8 kmol of h2 and 2 kmol of n2. determine the mass of each gas and the apparent gas constant of the mixture.
Answers: 3
question
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
question
Engineering, 06.07.2019 04:10
Aheat pump with refrigerant-134a as the working fluid is used to keep a space at 25°c by absorbing heat from geothermal water that enters the evaporator at 500c at a rate of 0.065 kg/s and leaves at 40°c. the refrigerant enters the evaporator at 20°c with a quality of 23 percent and leaves at the inlet pressure as saturated vapor. the refrigerant loses 300 w of heat to the surroundings as it flows through the compressor and the refrigerant leaves the compressor at 1.4 mpa at the same entropy as the inlet. determine: (a) the degrees of subcooling of the refrigerant in the condenser, b)-the mass flow rate of the refrigerant . (c) the heating load and the cop of the pump, and d)-the theoretical minimum power input to the compressor for the same heating load.
Answers: 3
You know the right answer?
Asteam power plant operates between a boiler pressure of 50 bar and a condenser pressure of 2 bar. c...
Questions
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Spanish, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
question
Mathematics, 18.09.2020 01:01
Questions on the website: 13722365