Engineering, 28.09.2019 00:30 jholland03

Acore plug has 21% porosity as determined using a boyle’s law porosimeter. when it was dry, the core weighed 238.00 g. when the outside of the dry core was lightly coated with paraffin, it weighed 249.51 g. the density of the paraffin was 0.896 g/ cm^3 . when the coated core was immersed in distilled water, it displaced 124.87 cm3 of water. what is the probable lithology of the core?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Condition monitoring is a major component of. (clo4) a)- predictive maintenance. b)-preventive maintenance c)-proactive maintenance d)-reactive maintenance.

Answers: 1

Answer

You know the right answer?

Acore plug has 21% porosity as determined using a boyle’s law porosimeter. when it was dry, the core...

Questions