subject
Engineering, 28.09.2019 00:30 caitlinrosekozoxegcb

Agas is contained in a vertical piston-cylinder assembly by a piston with a face area of 40 inand weight of 100 lbf. the atmosphere exerts a pressure of 14.7 lbf/inon top of the piston. a paddle wheel transfers 3 btu of energy to the gas during a process in which the elevation of the piston increases slowly by 4 ft. the piston and cylinder are poor thermal conductors, and friction between the piston and cylinder can be neglected. determine the work done by the gas on the piston, in btu, and the change in internal energy of the gas, in btu.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
What difference(s) did you notice using a pneumatic circuit over hydraulic circuit.explain why the pneumatic piston stumbles when it hits an obstacle.
Answers: 2
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.
Answers: 2
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
You know the right answer?
Agas is contained in a vertical piston-cylinder assembly by a piston with a face area of 40 inand we...
Questions
question
Health, 29.06.2019 10:30
Questions on the website: 13722363