subject
Engineering, 27.09.2019 04:00 eddyjunior679

Agalvanometer has a coil with a resistance of 24.0 ω, and a current of 180 μa causes it to deflect full scale. if this galvanometer is to be used to construct an ammeter that can read up to 10.0 a, what shunt resistor is required? a galvanometer has a coil with a resistance of 24.0 , and a current of 180 μa causes it to deflect full scale. if this galvanometer is to be used to construct an ammeter that can read up to 10.0 a, what shunt resistor is required? 234 µω 123 µω 342 µω 423 µω 432 µω

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
You know the right answer?
Agalvanometer has a coil with a resistance of 24.0 ω, and a current of 180 μa causes it to deflect f...
Questions
question
Mathematics, 12.11.2019 19:31
question
Mathematics, 12.11.2019 19:31
Questions on the website: 13722363