Ga copper pipe (kc = 400 w/m·k) with inner diameter of 20 mm and wall thickness of 0.025 m is used for carrying liquid oxygen to a storage tank. the liquid oxygen flowing in the pipe has an average temperature of -200°c and a convection heat transfer coefficient of 120 w/m2·k. the condition surrounding the pipe has an ambient air temperature of 20°c and a combined heat transfer coefficient of 20 w/m2·k. if the dew point is 10°c, determine the thickness of the insulation (ki = 0.05 w/m·k) around the copper pipe to avoid condensation on the outer surface. assume thermal contact resistance is negligible.

Amass of m 1.5 kg of steam is contained in a closed rigid container. initially the pressure and temperature of the steam are: p 1.5 mpa and t 240°c (superheated state), respectively. then the temperature drops to t2= 100°c as the result of heat transfer to the surroundings. determine: a) quality of the steam at the end of the process, b) heat transfer with the surroundings. for: p1.5 mpa and t 240°c: enthalpy of superheated vapour is 2900 kj/kg, specific volume of superheated vapour is 0. 1483 m/kg, while for t 100°c: enthalpy of saturated liquid water is 419kj/kg, specific volume of saturated liquid water is 0.001043m/kg, enthalpy of saturated vapour is 2676 kj/kg, specific volume of saturated vapour is 1.672 m/kg and pressure is 0.1 mpa.

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Machinery that is a key part of the process and without which the plant or process cannot function is classifed as: (clo4) a)-critical machinery b)-essential machinery c)-general purpose machinery d)-none of the specified options.