Find the transfer functions for the following circuits (10 points / circuit) assuming ideal op amps. write your transfer function in terms of the variables r1, r2, c1, and c2 (i. e., do not use the numeric values) (b) calculate the locations of poles and zeros for the circuit (10 points / circuit). give both analytic expressions in terms of r1, r2, c1, and c2 as well as numeric values. (c) determine whether the circuit is likely to be stable or unstable (5 points / circuit) assuming the numeric values given for r1, r2, c1, and c2.

Apump is used to circulate hot water in a home heating system. water enters the well-insulated pump operating at steady state at a rate of 0.42 gal/min. the inlet pressure and temperature are 14.7 lbf/in.2, and 180°f, respectively; at the exit the pressure is 60 lbf/in.2 the pump requires 1/15 hp of power input. water can be modeled as an incompressible substance with constant density of 60.58 lb/ft3 and constant specific heat of 1 btu/lb or. neglecting kinetic and potential energy effects, determine the temperature change, in °r, as the water flows through the pump.

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]