Engineering, 20.09.2019 03:30 zay179

Hydraulic systems utilize pascal's principle by transmitting pressure from one cylinder (called the primary) to another (called the secondary). since the pressures will be equal, if the surface areas are different then the forces applied to the cylinders' pistons will be different. suppose in a hydraulic lift, the piston of the primary cylinder has a 2.25-cm diameter and the piston of the secondary cylinder has a 24.5-cm diameter. what force, in newtons. must be exerted on the primary cylinder of this lift to support the weight of a 2200-kg car (a large car) resting on the secondary cylinder?

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Air is compressed isentropically from an initial state of 300 k and 101 kpa to a final temperature of 1000 k. determine the final pressure using the following approaches: (a) approximate analysis (using properties at the average temperature) (b) exact analysis

Answers: 1

Answer

Engineering, 04.07.2019 18:20

An open feedwater heater operates at steady state with liquid entering at inlet 1 with t? = 40°c and pl = 1 .2 mpa. water vapor att2-200°c and p2 = 1.2 mpa enters at inlet 2. saturated liquid water exits with a pressure of pa 1.2 mpa. neglect heat transfer with the surroundings and all kinetic and potential energy effects, determine the mass flow rate of steam at inlet 2 if the mass flow rate of liquid water at inlet 1 is given as 2 kg/s.

Answers: 3

Answer

You know the right answer?

Hydraulic systems utilize pascal's principle by transmitting pressure from one cylinder (called the...

Questions