Engineering, 19.09.2019 06:00 kevinh2683
Aconcrete column has a diameter of 360 mm and a length of 3 m . if the density (mass/volume) of concrete is 2.45 mg/m3, determine the weight of the column in pounds.
Answers: 1
Engineering, 04.07.2019 18:10
Draw the engineering stress-strain curve for (a) bcc; (b) fcc metals and mark important points.
Answers: 1
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Aconcrete column has a diameter of 360 mm and a length of 3 m . if the density (mass/volume) of conc...
Mathematics, 06.05.2020 07:11
English, 06.05.2020 07:11
History, 06.05.2020 07:11
History, 06.05.2020 07:11
Mathematics, 06.05.2020 07:11
Mathematics, 06.05.2020 07:11
Computers and Technology, 06.05.2020 07:11