Engineering, 19.09.2019 01:30 mustafa455486a

During the cycle, the heat is added into the air in process 2-3, and process 3-4. heat is rejected in process 5-1 only. there is no heat transfer during process 1-2 and process 4-5. so q_in=q_23+q_34, and q_out=q_51. let analyze this thermodynamic cycle. process 3-4: constant pressure with heat addition into the system. (a) define your system and draw a boundary to separate your system and the surroundings. (b) for process 3-4 only, write down the energy conservation equation for the system. (c) if q34 (heat transfer into the system during process 3-4), p3 (pressure at state 3), v3 (volume at state 3) and v4 (volume at state 4) are given, rewrite energy conservation equation for part (b) and find total internal energy change for this process δu34.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?

Answers: 2

Answer

Engineering, 04.07.2019 18:10

The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m

Answers: 2

Answer

You know the right answer?

During the cycle, the heat is added into the air in process 2-3, and process 3-4. heat is rejected i...

Questions