subject
Engineering, 14.09.2019 02:30 guccikathyyy6195

Laplace number represents the ratio of surface tension to momentum- transport inside a fluid. it is used in the characterization of free surface fluid dynamics. show that the laplace number is dimensionless. the laplace number is expressed as: = / where σ = surface tension, rho = density , l = length and μ = liquid viscosity. the units of liquid viscosity are kg/(m. s) and for surface tension are n/m

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:20
Find the kinematic pressure of 160kpa. for air, r-287 j/ kg k. and hair al viscosity of air at a temperature of 50°c and an absolute (10 points) (b) find the dynamic viscosity of air at 110 °c. sutherland constant for air is 111k
Answers: 3
question
Engineering, 04.07.2019 19:10
An engine, weighing 3000 n, is supported on a pedestal mount. it has been observed that the engine induces vibration into the surrounding area through its pedestal at the maximum operating speed. determine the stiffness of the dynamic vibration absorber spring in (n/m) that will reduce the vibration when mounted on the pedestal. the magnitude of the exciting force is 250 n, and the amplitude of motion of the auxiliary mass is to be limited to 2 mm note: in this question type-in right numbers, no decimals, no fractions, no unit. approximate to right number if needed
Answers: 3
You know the right answer?
Laplace number represents the ratio of surface tension to momentum- transport inside a fluid. it is...
Questions
question
Mathematics, 23.05.2020 11:59
question
Mathematics, 23.05.2020 11:59
question
Physics, 23.05.2020 11:59
question
Mathematics, 23.05.2020 11:59
Questions on the website: 13722367