subject
Engineering, 14.09.2019 01:20 ethannila

Calculate the size of a gas filled accumulator needed to supply a hydraulic system with 25 litres of fluid from a pressure of 20 mpa to a pressure of 12 mpa. the accumulator is initially charged to a pressure of 8 mpa. the expansion and compression takes place rapidly and the gas is nitrogen with an adiabatic process exponent of 1.4.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
You are making beer. the first step is filling the glass carboy with the liquid wort. the internal diameter of the carboy is 15 in., and you wish to fill it up to a depth of 2 ft. if your wort is drawn from the kettle using a siphon process that flows at 3 gpm, how long will it take to fill?
Answers: 1
question
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
You know the right answer?
Calculate the size of a gas filled accumulator needed to supply a hydraulic system with 25 litres of...
Questions
question
Computers and Technology, 29.01.2021 22:00
question
Mathematics, 29.01.2021 22:00
question
Mathematics, 29.01.2021 22:00
Questions on the website: 13722362